Maintenance of hydraulic drilling rig?water well drilling

May 16, 2024

06.jpg

(1) Shift maintenance:


  ①Clean the outer surface of the drilling rig, and pay attention to the cleaning and good lubrication of the surface of the drilling rig base cableway and vertical compound.


  ② Check whether all exposed anchor bolts, nuts, commercial insurance cotter pins, etc. are firm and reliable.


  ③ Fill with lubricating grease or grease according to lubricating regulations, refer to Figure 2 and Table 1.


  ④ Check the oil level of the transmission, differential and hydraulic transmission system.


  ⑤ Check the oil leakage of each part and solve it in various ways according to the situation.


  ⑥Clear other common faults generated in the class.


   (2) Weekly maintenance:


  ① Completely carry out the new items stipulated by the class maintenance.


  ② Eliminate stains and soil on the surface of the chuck and slip teeth.


  ③ Clean and clean the oil and mud on the inner surface of the brake.


  ④Clear the common failures that occurred during this week.


   (3) Monthly maintenance:


  ① Completely carry out the new items stipulated by class and weekly maintenance.


  ②Remove the chuck, and clean the slips and slip seats. If it is damaged, it should be replaced immediately.


  ③Clean the filter device in the fuel tank of the car, and replace the mildewed or stained gear oil.


  ④ Check the condition of all key parts and components. If there is any damage, it should be replaced in time, and work without injury.


  ⑤ Solve common failures that occurred within the current month.


  ⑥If the drilling rig is not used for a long time, each exposed part (especially the exposed surface of the processing surface) should be coated with grease.


  • 8615865715332

    Inquire Now and Enjoy 3% Product Promotion